CHANNEL COUNTER OPERATION

SETTING THE CHANNEL COUNTER SWEEP WIDTH

You may change the bandwidth of the Channel Counter. Available selections are ±5, ±10, ±50, and ±100 MHz (default: ±5 MHz).

Here is the procedure for setting the Channel Counter Bandwidth:

1.Press and hold the key for one second to enter the Set Mode.

2.Rotate the DIAL knob to select Set Mode Item 19: CH

COUNTER.

3. Press the key briefly to enable adjustment of this Set Mode Item.

4.Rotate the DIAL knob to select the desired bandwidth (see above).

5.Press the PTT switch briefly to save the new setting and

exit to normal operation.

VX-8R OPERATING MANUAL

99