Vertex Standard VX-8R nel, B24, DIAL, DIAL, DIAL, VX-8R, VX-8R, into several, Memory Banks, one memory chan, 1) You may assign, MEMORY BANK OPERATION, 2) The PMS memory channels

MEMORY MODE (REGULAR MEMORY CHANNEL OPERATION)

MEMORY BANK OPERATION

The large number of memories available in the VX-8Rcould be difficult to utilize without some means of organizing them. Fortunately, the VX-8Rincludes provision for dividing the memories into as many as 24 Memory Banks, so you can categorize the memories in a manner convenient to you. You may enter and exit the “Memory Bank” mode by a single

press of the key, as we shall see below.

ASSIGNING MEMORIES TO A MEMORY BANK
1. Recall the memory channel to be assigned to a Memory
	Bank.
2.	Press and hold in the		key for 1/2 second, then rotate the
	DIAL knob to select the Memory Bank number where you
	want to include this channel (Memory Bank numbers are
	found before memory channel “1”). The “ ” icon will ap-
	pear at the upper left of the Memory Bank number if some
	channels have already been assigned to that Memory Bank
	number. (If no channels are assigned to the Memory Bank, the “ ” icon appears on
	the left of the Memory Bank number).
3.	Press the	key briefly.		Memory Channel		Memory Bank “1”
4.	At this point, the memory			Memory Channel		Memory Bank “1”
4.	At this point, the memory			CH 1	145.000 MHz	144 MHz Amateur Band Channels
	channel data is copied into			CH 2	145.080 MHz
	channel data is copied into			CH 3	435.000 MHz	Memory Bank “2”
	the Memory Bank.			CH 4	435.500 MHz	430 MHz Amateur Band Channels
				CH 5	145.800 MHz	430 MHz Amateur Band Channels
				CH 5	145.800 MHz
				CH 6	436.000 MHz	Memory Bank “3”
	1) You may assign			CH 7	128.800 MHz	Memory Bank “3”
	1) You may assign					All Amateur Band Channels
	one memory chan-					Memory Bank “4”
	nel	into several				Club Channels
	nel	into several		CH 897	145.620 MHz
Memory Banks.				CH 897	145.620 MHz	Memory Bank “5”
Memory Banks.				CH 898	436.780 MHz	Memory Bank “5”
2) The PMS memory channels				CH 899	128.600 MHz	Air Band Channels
2) The PMS memory channels
(L1/U1 through L50/U50) may not be assigned to a Memory Bank.

MEMORY BANK RECALL

1.Press the key, if needed, to enter the MR mode.

2.Press the key to activate the “Memory Bank” mode.

	The “MR” indicator will be replaced by one of the Memory
	Bank numbers (“B 1” through “B24”).
3.	Press the	key, and then press the	key,
	then rotate the DIAL knob to select the desired
	Memory Bank.
4.	Press the	key. Now, as you rotate the DIAL
	knob to select memories, you will observe that you
	can only select memory channels in the current Memory Bank.

VX-8R OPERATING MANUAL