Vertex Standard VX-8R manual 163

ARS/GPS SET MODE

SET MODE ITEM	FUNCTION	AVAILABLE VALUES
		(DEFALT: BOLD ITALIC)
1: APRS AF DUAL	Enables/Disables the AF DUAL function when the APRS signal is received.	ON / OFF
2: APRS DESTINATION	Indicates the model code of this transceiver.	APY008 (Fixed)
3: APRS FILTER	Selects the filter type option allowing you to receive the only specified types of APRS Beacon	Mic-E: ON / OFF
	data.	POSITION: ON / OFF
		WEATHER: ON / OFF
		OBJECT: ON / OFF
		ITEM: ON / OFF
		STATUS: ON / OFF
		OTHER: ON / OFF
4: APRS MODEM	Enables/Disables the APRS modem (AX25 Data modem) and its Baud Rate.	OFF / 1200bps / 9600bps
5: APRS MSG FLASH	Enables/Disables the white LED light when the APRS message is received.	ON / OFF
6: APRS MSG TXT	Programming the Fixed form APRS Message.	--
7: APRS MUTE	Enables/Disables the audio output of the “B-Band” during APRS operation.	ON / OFF
8: APRS RINGER MSG	Enables/Disables the alert ringer when the APRS message is received.	ON / OFF
9: APRS RINGER BCON	Enables/Disables the alert ringer when the APRS beacon is received.	ON / OFF
10: APRS UNIT	Selects the unit for the APRS Beacon information.	Position: MM.MM’ / MM’SS”
		Distance: km / mile
		Speed: km/h / knot / mph
		Altitude: m / ft
		Temp: °C / °F
		Rain: mm / inch
		Wind: m / s / mph
11: APRS TX DELAY	Select the transmission delay time between transmitting the APRS data and transmitting a	100ms / 200ms / 300ms / 400ms / 500ms /
	preamble (flag code) prior to the APRS data.	750ms / 1000ms
12: BEACON INTERVAL	Select the Beacon Interval time during APRS operation	15sec / 30sec / 1min / 2min / 3min / 5min /
		10min / 15min / 30min
13: BEACON STATS TXT	Store the message for the APRS Beacon	--
14: BEACON TX	Enables/Disables the automatic transmission of the APRS Beacon.	AUTO / MANUAL
15: DIGI PATH	Sets the APRS packet path you wish to path through.	Addr 1: WIDE1 -1
		Addr 2: WIDE2 -1
		Addr 3 ~ 8: non
16: GPS DATUM	Select the GPS Datum.	WGS-84 / Tokyo Mean / Tokyo Japan /
		Tokyo Korea / Tokyo Okinawa
17: GPS TIME SET	Enables/Disables the GPS clock data to be used.	AUTO / MANUAL
18: GPS UNIT	Selects the units for the GPS information.	Position: .MMM’ / ‘SS”
		Speed: km/h / knot / mph
		Altitude: m / ft
19: MSG FILTER	Selects the filter type option allowing you to receive only specified types of APRS Message	G1 ~ G5, B1 ~ B3
	information.	(G1: ALL, G2: CQ)
20: MY CALLSIGN	Program your callsign.	--
21: MY POSITION	Determine and memorize your location (Lat/Log).	Auto / Lat / Lon / P1 ~ P10
22: MY SYMBOL	Selects your icon which will be displayed on the monitors of other stations as you.	more tham 180 symbols
23: POSITION COMMENT	Selects position comment depending on your situation.	Off Duty / En Route / In Service / Returning /
		Committed / Special / Priority /
		Custom 0 ~ Custom 6 / EMERGENCY!
24: TIME ZONE	Set the time offset between the local time and UTC.	UTC -13:00H ~ UTC +13:00H (0.5H / step)
		(UTC + 0:00H)

VX-8R OPERATING MANUAL 161