SET MODE

SET MODE ITEM

FUNCTION

AVAILABLE VALUES

(DEFALT: BOLD ITALIC)

1: ANTENNA AM

Select the antenna to be used in the AM Broadcast listening.

BAR & EXT / BAR ANTENNA

2: ANTENNA FM

Select the antenna to be used in the FM Broadcast listening.

EXT ANTENNA / EARPHONE

3: ANTENNA ATT

Enables/Disables the receiver Front-end Attenuator.

ON / OFF

4: APO

Setting of the Automatic Power-Off time.

0.5hour - 12.0hour / OFF

5: ARTS BEEP

Select the Beep option during ARTSTM operation.

IN RANGE / ALWAYS / OFF

6: ARTS INTERVAL

Select the Polling Interval during ARTSTM operation.

15sec / 25sec

7: BANK LINK

Enables/Disables the Memory Bank Link Scan.

--

8: BANK NAME

Stores Alpha-Numeric “Tag” for the Memory Bank.

--

9: BCLO

Enables/disables the Busy Channel Lock-Out feature.

ON / OFF

10: BEEP EDGE

Enables/disables the Band-edge beeper while selecting the frequency by the DIAL knob.

ON / OFF

11: BEEP LEVEL

Adjust the Beep volume level.

LEVEL 1 - LEVEL 9 (LEVEL 5)

12: BEEP MELODY

Create the Beep Melody for Bell ringer function.

--

13: BEEP SELECT

Enables/Disables the keypad beeper.

KEY & SCAN / KEY / OFF

14: BELL RINGER

Selects the number of Bell ringer repetitions.

OFF / 1Time - 20Time / CONTINUOUS

15: BELL SELECT

Enables/Disables the Bell ringer function and its sound selection.

OFF / BELL /

 

 

USER BP1 / USER BP2 / USER BP3

16: BLUETOOTH P-CODE

Pairing the Bluetooth® unit and setting the Pin Code.

0000 - 9999 (6111)

17: BLUETOOTH SET

Select the operating mode of the optional BH-1/BH-2Bluetooth® Headset.

VOX: PTT / HIGH / LOW,

 

 

MODE: MONO / STEREO,

 

 

SAVE: ON / OFF

 

 

POWR: ON / OFF

18: BUSY LED

Enables/Disables the BUSY LED while the squelch is open.

ON / OFF

19: CH COUNTER

Selects the Channel Counter Search Width.

±5 MHz / ±10 MHz / ±50 MHz / ±100 MHz

20: CLOCK SHIFT

Shifting of CPU clock frequency.

ON / OFF

21: CW ID

Program and activate the CW Identifier (used during ARTSTM operation).

--

22: CW LEARNING

Enables/Disables the CW Learning feature.

--

23: CW PITCH

Select the CW tone pitch for the CW Learning, CW Training, and CW Identifier functions.

400 - 1000 Hz (50 Hz/step) (700 Hz)

24: CW TRAINING

Enables/Disables the CW Training feature.

--

25: DC VOLTAGE

Indicates the DC Supply Voltage.

--

26: DCS CODE

Setting of the DCS code.

104 standard DCS codes (DCS 023)

27: DCS INVERSION

Enables/Disables the “Inverted” DCS tone.

RX-NORMAL, TX-NORMAL /

 

 

RX-INVERT, TX-NORMAL /

 

 

RX-BOTH, TX-NORMAL /

 

 

RX-NORMAL, TX-INVERT /

 

 

RX-INVERT, TX-INVERT /

 

 

RX-BOTH, TX-INVERT

28: DTMF DELAY

Selects the DTMF Autodialer Delay Time.

50ms / 250ms / 450ms / 750ms / 1000ms

29: DTMF MANUAL/AUTO

Enables/Disables the DTMF Autodial feature.

MANUAL / AUTO

30: DTMF SELECT

Programming of the DTMF Autodialer.

--

31: DTMF SPEED

Selects the DTMF Autodialer Sending Speed.

50ms / 100ms

32: EAI

Enables/Disables the Emergency Automatic ID (EAI) feature.

ON / OFF

33: EAI TIME

Sets the Emergency Automatic ID (EAI) operating mode and its transmit time.

INT 1M ~ INT 9M / INT10M / INT15M /

 

 

INT20M / INT30M / INT40M / INT50M /

 

 

COM 1M ~ COM 9M / COM10M /

 

 

COM15M / COM20M / COM30M /

 

 

COM40M / COM50M (COM 5M)

34: EMERGENCY SELECT

Select the alarms utilized when the Emergency function is engaged.

BEEP / STROBE / BEEP&STROBE /

 

 

BEAM / BEEP&BEAM / CW / BEEP&CW /

 

 

CW-ID TX S

35: EXTENDED MENU

Enables/Disables the extended Set Mode Menu.

ON / OFF

36: FW KEY HOLD TIME

Set the duration that a secondary function of the [F/W] key (press and holding the [F/W] key)

FW0.3sec / FW0.5sec / FW0.7sec /

 

is held determines the function they activate.

FW1.0sec / FW1.5sec

37: HALF DEVIATION

Reducing the Deviation level by 50 %.

ON / OFF

38: HOME VFO

Enables/Disables the function of the VFO DIAL knob, while in the Home Channel mode.

DISABLE / ENABLE

39: HOME/REVERSE

Selects the primary function of the [H/M] key (press the [H/M] key).

HOME / REV

40: INT MANUAL/AUTO

Enables/Disables the DTMF Autodialer feature while operating using the Internet Connec-

MANUAL / AUTO

 

tion feature (WIRESTM).

 

41: INTERNET

Enables/Disables the Internet Connection feature (WIRESTM).

ON / OFF

42: INTERNET CODE

Selects the Access Number (DTMF digit) for the SRG operation of the Internet Connection

DTMF 0 ~ DTMF F

 

feature (WIRESTM).

(DTMF 1)

43: INTERNET KEY

Selects the primary function of the [INTERNET] key.

INTERNET / INTERNET SELECT /

 

 

SET MODE

44: INTERNET MODE

Selects the operating mode of the Internet Connection feature (WIRESTM).

FRG / SRG

45: INTERNET SELECT

Programming of the Access Number (DTMF code) for the FRG station of the WIRESTM (or

--

 

non WIRESTM Internet Link System) access.

 

46: LAMP

Selects the LCD/Keypad Lamp mode.

KEY 2sec - KEY10sec / CONTINUOUS /

 

 

OFF (KEY 5sec)

47: LANGUAGE

Selects the language for the Set Mode selections.

ENGLISH / JAPANESE

48: LCD CONTRAST

Setting of the Display contrast level.

LEVEL 1 ~ LEVEL32 (LEVEL24)

49: LCD DIMMER

Setting of the Display brightness level.

LEVEL 1 ~ LEVEL 4

50: LED LIGHT

Illuminates the white LED light continuously (useful as emergency flashlight at night).

--

51: LOCK

Selects the Control Locking lockout combination.

KEY / DIAL / KEY&DIAL / PTT / KEY&PTT /

 

 

DIAL&PTT / ALL

52: MEMORY FAST STEP

Selects the channel step for the fast channel selection mode while in the Memory Recall

10CH / 20CH / 50CH / 100CH

 

mode.

 

53: MEMORY NAME

Stores “Alpha-Numeric” tags for the Memory channels.

--

54: MEMORY PROTECT

Enables/Disables the Memory Write Protector.

ON / OFF

138

VX-8R OPERATING MANUAL