Automatic Dialing | Vertical Communications GCA70-248 specs

GCA70-248

Making Calls

Automatic Dialing

Automatic dialing provides one- or two-button speed dialing using programmable buttons at which you have previously stored numbers. There are two types of speed dial numbers: (1) numbers that you store for your own use (personal speed dial numbers and autodial numbers), and (2) numbers that the system attendant stores for everyone’s use (system speed dial numbers).

NOTE: When you call from a station not equipped with a speaker (for example, 8112N and 8212N) you must LIFT the handset AND PRESS TAP before initiating any automatic dialing activity.

To automatically dial a speed dial number stored at one of the programmable buttons on your station, choose one of the following:

1.PRESS programmed speed dial button (line selection is usually a part of the stored speed dial number).

2.PRESS SHIFT AND programmed speed dial button (to choose number stored as second choice at that button).

To speed dial a personal speed dial number stored at the dial pad,

1.DIAL speed dial number on dial pad ( to ).

NOTE: If you are already on a line, you must press SHIFT before dialing the personal or system speed dial numbers that are stored at the dial pad. Also, if a speed dial number’s preselected line is in use, the speed dial will not engage.

To speed dial a system speed dial number stored at the dial pad,

1. DIAL AND system speed dial number.

Non-LCD Speakerphone Station User’s Guide

25

Image 33

Vertical Communications GCA70-248 manual Automatic Dialing

Contents

Page DSU II Digital Expandable Systems This User’s Guide is for the following system Introduction About This Book Contents GCA70-248 Contents Advanced Call Handling Glossary Contents GCA70-248 Non-LCD Speakerphone Station User’s Guide Welcome Setting Up Your Station Positioning Your Station To adjust the pedestal Models 8212S and 8212N only Setting Volume Levels Setting a Personal Ringing ToneTo select one of the ring tones, proceed as follows To set the ringer loudness level When you hear intercom ringing two short bursts When you hear outside ringing two long burstsAnswering and Making Calls To set the speaker and handset loudness levels To dial an intercom number manually To dial an outside number manually Message-Waiting Light Understanding the Basic FunctionsMicrophone Opening not available on 8112N and 8212N Speaker not available on 8112N and 8212N Impact 8112N-** Telephone Your Station’s Buttons Transfer/Conference Button TRNS/CONF Tap Button TAP Your Station’s Display Lights Next to a fixed feature or programmable feature buttonNext to a line button Above the Mute button Above the Hold button Next to Intercom buttonNext to the Message button SCS Series Models only Above the Speaker button Models Exceptions Supported Telephone Models Answering Outside Calls When you hear an intercom tone followed by a caller’s voice Night Transferred Calls Line Access From Any StationWhen you hear ringing Answering Intercom Calls To disable DND To enable DND, choose one of the followingDo Not Disturb Condition To override a do not disturb condition at another telephone Holding Calls Exclusive HoldHandling Hold Recalls If a held line is recalling, choose one of the following Directed HoldTo place a call on hold at another telephone directed hold You can pick this call back up if you need to. To do this Group Call Pickup Call PickupDirected Call Pickup Pickup For Monitored Stations To monitor another telephone Receiving Subdued Off-Hook Voice Announcements Sohva Handling an Incoming SohvaTo respond to a Sohva verbally not available on 8112N Voice Announce Blocking To block all voice-announced callsTo unblock all voice-announced calls Page Making Outside Calls To dial an outside number using your prime line To manually cause the other telephone to ring tone calling Making Intercom CallsTo tone call automatically To voice announce manually Automatic Dialing Redialing Redial Last-Dialed NumberAutomatic Redialing Sending Subdued Off-Hook Voice Announcements Sohva Make a Sohva announcement using the Sohva button as followsRedial Programming Storing Numbers To permanently store a number you’ve just dialed Camping On Options Busy or Idle Station, Automatic CallbackBusy Station, Wait For An Answer Call Waiting Busy No Answer To camp on when you hear a busy signal If your system provides an external paging unit PagingIf your system provides all-call or zone paging To make a reply to a Meet-Me Waiting for a Line Queuing To cancel line group queuingTo queue for a line group To queue for a line that appears on your telephone Screened Call Transfers Call TransferringIf the intercom party is busy or does not answer Answer call To transfer an unscreened call to another system telephone Unscreened Call Transfers Creating a Conference Call Conferencing Managing a Conference Call Unsupervised Conference Calls To cancel all call forwarding To cancel intercom and prime line call forwardingCall Forwarding Forwarding a Call To activate the Cfos feature To deactivate the Cfos featureCall Forward Outside System Cfos Handling Park Recalls Call ParkingTo answer a park recall To place a park recall on hold at your station ANSWER/RETRIEVE call To re-park a park recall and restart the park timer Account Codes To enter account code on an incoming callTo enter account code on an outgoing call Station-To-Station Message Delivery To turn on message lightTo turn off message light LCD Message Delivery To turn message onTo turn off message and your intercom light To send a message for assistance Assist Button Message Delivery Message Waiting Light and Messaging To turn on the message waiting light at an idle telephoneTo receive a message at an alert DSS Numbers Programming Autodial And Speed Dial Numbers Speed Dial Numbers Personal Speed Dial Numbers To manually store an access code Feature Buttons Response Message Button Special Purpose Feature ButtonsTransfer Button Subdued Off-Hook Voice Announce Sohva Button Automatic Redial Button Group Listening ButtonTo program a Sohva button To program a group listening button To program an assist button Assist Button Line Groups To access a system line group Setting Current Volume Level Volume Control Muting Your Station not available on 8112N To mute your stationTo speak to the distant party Default Volume Control Background Music Not available on 8112N or 8212N To turn the music onTo turn the music off To enable a Tracker Pager at your station To disable a Tracker Pager at your stationTracker Paging System Retrieve call Answer call and Press TRNS/CONF Automatic Set Relocation To select the IST device if the Data light is off Data Interface Unit DSS/BLF Console Operation Level access buttons Accessing The DSS/BLF Console Button LevelsPage Feature Access Codes Feature Access Codes GCA70-248 + to Tracker Pager All-Call Paging Account CodeAssist Button Attendant Block Programming Class Of Service COS ProgrammingButton Query Call Forward Data Interface Unit DIU Direct Inward System Access DisaDepartmental Station Operation Dial By Name Tie Lines HookswitchExclusive Hold Handsfree Answer Inhibit Line Groups Last Number RedialingLine Queuing Meet-Me Answer Paging Pulse/Tone SwitchingPrime Line Privacy System Alarm Reporting Service ObservingScreened Call Transfer Speed Dialing Unscreened Call Transfer Tracker PagerUnsupervised Conference Voice call Speakerphone User Guidelines Speakerphone Characteristics Speakerphone Characteristics GCA70-248 Index Index GCA70-248 TRNS/CNF Index GCA70-248 Non-LCD Speakerphone Station User’s Guide CCB 15B