Vidikron Vision 110 Connections to the Vision, Connecting Source, Hdmi Connections See Figure

Installation

Proceed as follows to connect the Vision 110 to your video sources, external controller(s) – if present – and AC power.

When connecting your equipment:

•Turn off all equipment before making any connections.

•Use the correct signal cables for each source.

•Ensure that the cables are securely connected. Tighten the thumbscrews on connectors that have them.

3.7

Connections to the Vision 110

To access the connector panel, press	Connector Panel Access
the door release button so it pops out.
Turn the knob clockwise or
counter-clockwise and pull gently on it
to open the door.
Connect your video sources to the Vision 110 as shown and described in the sections that	Connecting Source
follow.	Components to the Vision
HDMI Connections: See Figure 3-10.	110

Use the HDMI inputs whenever possible. This ensures the highest video

Tipquality because the signal is carried in the digital domain throughout the entire signal path, from source component output into the projector.

HD3 (VGA / Y-Pb-Pr)

Pr)-Pb-Y / (VGA HD3

HD2 (BNC)

(BNC) HD2

HD1 (RCA)

(RCA) HD1

HDMI or DVI-to-HDMI Cable (sold separately)

BD/HD-DVD/

DVD/DTV STB

Figure 3-10. HDMI Source Connections

Vidikron Vision Model 110 Installation/Operation Manual 29