Vidikron Vision 110 Connecting 12-volt Trigger Outputs to External Equipment, Rear Panel

Installation

If your Vision 110 is equipped with a CineWide with AutoScope system, connect the AutoScope lens motor to a 12-volt trigger output on the Vision 110; see Figure 3-16.

Similarly connect other 12-volt trigger-activated equipment (such as retractable screens or screen masks) to the other trigger outputs.

For more information on using the 12-volt triggers, refer to Triggers on page 58.

Connecting 12-volt Trigger Outputs to External Equipment

AutoScope Lens Motor (Rear)

Power	AC Input
Switch

3.5-mm mini plug

Retractable Screen or other

12-volt trigger-activatedSleeve = Ground

device

Tip = +12V

Rear Panel

HD1 (RCA)

(RCA) HD1

Figure 3-16. 12-volt Trigger Output Connections

Vidikron Vision Model 110 Installation/Operation Manual 35