Operation
4.3
Changing the OSD Language
4.4
Adjusting the Picture Orientation
The Vision 10/12 OSD language is initially set to English, but can also display the menus in French, Italian, German or Spanish. To change the OSD language:
1.Press MENU.
2.Select Installation from the Main Menu.
3.Select Language from the Installation Menu.
4.Press 
or 
to select the desired language. The change takes effect immediately.
By default, the Vision 10/12 is configured for a “floor/front” installation, in which the projector is installed upright and in front of the screen. If it is installed behind the screen and/or mounted on a ceiling, you must change the picture orientation. To do this:
1.Press MENU.
2.Select Installation from the Main Menu.
3.Select Picture Configuration from the Installation Menu.
4.Choose Floor Rear, Ceiling Front or Ceiling Rear, to match the installation method.
30 | Vidikron Vision Model 10/Model 12 Owner’s Operating Manual |
