Vidikron Vision 12, Vision 10 manual Main Menu, Source Select, Aspect Ratio

Operation

Main Menu ➤

Vision Model 10

Picture Adjust

Source select

Aspect Ratio

Image Option

Installation

ISF Settings

The Main Menu is the starting point for accessing all projector functions.

(The ISF Settings menu is grayed out and not accessible until you enter a passcode.)

Source Select ➤

Source select

QVideo S-Video Component 1 Component 2

RGB-HD HDMI/DVI

From the Main Menu, select Source select to choose a video signal source.

The active source is indicated by a green square (Q) to its left; in the example at left, Video is the active source.

Aspect Ratio ➤

Aspect Ratio

QAnamorphic (16/9) Standard (4/3) LetterBox IntelliWide Cinema Cinema Fill

To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio from the Main Menu and press ENTER. Select the appropriate aspect ratio for the type of program material being viewed; refer to Table 4-1.

The currently-selected aspect ratio is indicated by a green square (Q) to its left; in the example at left, Anamorphic is selected.

When you change the aspect ratio, save the change to a preset

Note afterwards. Otherwise, the change will be lost when a different input is selected. (The aspect ratio is saved for each input and resolution separately.) For information about saving settings, refer to Save Settings on page 42.

34 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual