Vidikron Vision 12 manual ISF-Enabled Vision 10/12 Splash Screen

Operation

ICC Adjust: Use the ICC Adjust controls to customize the stored NTSC, HDTV and/or PAL color space characteristics. To do this:

1.Select ICC Adjust from the ISF Calibration menu and press ENTER.

2.Select the color space to modify using the left- or right-arrow buttons.

3.Select a component color (Red, Green, Blue, Cyan, Yellow or Magenta).

For each component color, you can adjust the following:

•Intensity: This slidebar adjusts the intensity -- also known as luminance -- of a given color.

•Saturation: This slidebar adjusts the color saturation level -- the amount of that color in a video image. Lower settings produce less saturated colors; a setting of “-64” removes that color from the image entirely. If the saturation is too high, that color will be overpowering and unrealistic.

•Hue: This slidebar adjusts the red/green color hue for true color reproduction of video signals. For best results, adjust the hue while displaying an external color bar test pattern (Figure 4-7).

When you have finished customizing the color space, select Store Setting and press ENTER.

ISF Enable: Use ISF Enable to control the display of the ISF logo on the Vision 10/12 splash screen upon power-up; see Figure 4-11.

ICC Adjust

Color Type			NTSC
	R G	B C Y M
Intensity				0
Saturation				0
Hue				0
Store Setting

&$/,%5$7(')25

Figure 4-11. ISF-Enabled Vision 10/12 Splash Screen

Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 47