Vidikron Vision 15ET/CineWideTM On / Off, Ir Output Indicator, Source Selection Buttons VIDEO

Controls and Functions

1.ON / OFF

Press to turn the projector on or off.

2.IR OUTPUT INDICATOR

Lights when a button is pressed to indicate that an IR signal is being transmitted.

3.Source Selection Buttons:

VIDEO

Press to switch to the Composite video input.

S-VIDEO

Press to switch to the S-Video input.

COMP

Press to switch to the Component (480i/480p/576i/576p/720p/1080i/1080p) video input.

DVI-A

Press to switch to the DVI-A input.

DVI-D

Press to switch to the DVI-D input.

HDMI

Press to switch to the HDMI input.

4.Aspect Ratio Selection Buttons

Use these buttons to select an aspect ratio directly, as follows:

16:9

For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.

4:3

Scales the input signal to fit 4:3 display mode in the center of the screen.

LETBOX (Letterbox)

For viewing LaserDisc movies or non-anamorphic DVDs on a 16:9 screen.

I-WIDE (IntelliWide)

Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display.

CINEMA

For viewing 2.35:1 source material.

I-WIDE (IntelliWide 2.35 – Vision 15ET/CineWide only)

Selects the IntelliWide 2.35 aspect ratio, used for viewing 16:9 source material on a 2.35:1 screen.

5.DEF

Press to restore factory-default settings for the current source.

6.ISF DAY

Press to recall settings for the current input from the “ISF Day” memory preset.

7.ENTER

Press to select a highlighted menu item or confirm a changed setting.

Vidikron Vision Model 15 Installation/Operation Manual 9