Vidikron Vision 15 Mounting the Vision, Floor Mounting Upright, Ceiling Mounting Inverted

Models: Vision 15ET/CineWideTM Vision 15ET Vision 15

1 82
Download 82 pages 23.77 Kb
Page 36
Image 36
Mounting the Vision 15

Installation

3.5

 

There are several methods for mounting the projector. Depending on your chosen

Mounting the Vision 15

 

installation, one method may be more suitable than another.

Floor Mounting (Upright)

In typical front and rear screen installations, the projector can be mounted to a secure and

 

 

level surface such as a table or cart. Carts are useful when moving a projector during a

 

 

presentation or from site to site. If possible, lock the wheels when it’s in position to prevent it

 

 

from being moved during a presentation.

Ceiling Mounting (Inverted)

For fixed installations, and for those that want the projector out of sight or have a limited

 

 

space for projector and audience, you can invert the Vision 15 and suspend it from the ceiling

 

 

using a specially-designed ceiling mount fixture.

 

 

Note

Use only the Vidikron-approved ceiling mount kit designed for your

 

 

projector. Install the mount kit according to the instructions provided

 

 

 

 

 

 

with it.

 

 

The projector can also be inverted and placed in an enclosure above and behind the viewing

 

 

area. Install four feet on the inside bottom surface of the enclosure on which the projector

 

 

can rest. A variety of materials can be used for this purpose (for example, rubber crutch tips

 

 

or turntable feet).

 

Adjusting the Projector

When the Vision 15 is installed upright, you can adjust the projector height or projection

Height or Projection Angle

 

angle by turning the four adjustable feet on the bottom of the projector; see Figure 3-8.This

is useful for correcting the angle of projection when the projector is placed on an uneven surface or when the screen is at an angle. You can tilt the projector up to five (5) degrees up or down by adjusting the feet.

The feet are connected to threaded bolts; turn them clockwise to raise the projector or counterclockwise to lower it.

Tilting the projector may cause keystone distortion. To correct this, refer

Note

to Installation on page 45.

 

Figure 3-8. Adjusting the Feet

22

Vidikron Vision Model 15 Installation/Operation Manual

Page 36
Image 36
Vidikron Vision 15 Mounting the Vision, Floor Mounting Upright, Ceiling Mounting Inverted, Adjusting the Projector