Manuals / Vidikron / Computer Equipment / Projector

Vidikron Vision 15ET operation manual Connections to the Vision, HDMI/DVI Connections See Figure

Models: Vision 15ET/CineWideTM Vision 15ET Vision 15

1 82
Download 82 pages 23.77 Kb
Page 37
Image 37
HDMI/DVI Connections: See Figure 3-9.

Installation

Proceed as follows to connect the Vision 15 to your video sources, external controller(s) – if present – and AC power.

When connecting your equipment:

•Turn off all equipment before making any connections.

•Use the correct signal cables for each source.

•Ensure that the cables are securely connected. Tighten the thumbscrews on connectors that have them.

To access the connector panel, pull firmly on the cable access cover to open it.

Connect your video sources to the Vision 15 as shown and described in the sections that follow.

HDMI/DVI Connections: See Figure 3-9.

Use the HDMI input whenever possible. This ensures the highest video

Tipquality because the signal is carried in the digital domain throughout the entire signal path, from source component output into the projector.

3.6

Connections to the Vision 15

Connector Panel Access

Connecting Source Components to the Vision 15

Vidikron Vision Model 15 Installation/Operation Manual

23

Page 36 Page 38
Page 37
Image 37
Vidikron Vision 15ET operation manual Connections to the Vision, HDMI/DVI Connections See Figure, Connector Panel Access
Page 36 Page 38