1Introduction

This Owner’s Manual describes how to install, set up and operate the Vidikron DView™

1.1

VL-52/VL-57 Flat-Panel LCDs. Throughout this manual, the Vidikron DView™ VL-52/VL-57

About This Manual

Flat-Panel LCDs are referred to simply as the “DView.”

 

Vidikron has prepared this manual to help home theater installers and end users get the

Target Audience

most out of the DView.

 

Vidikron has made every effort to ensure that this manual is accurate as of the date it was

 

printed. However, because of ongoing product improvements and customer feedback, it

 

may require updating from time to time. You can always find the latest version of this and

 

other Vidikron product manuals on-line, at www.Vidikron.com.

 

Vidikron welcomes your comments about this manual. Send them to info@Vidikron.com.

If You Have Comments About

 

This Manual...

Text Conventions: The following conventions are used in this manual, in order to clarify the

Textual and Graphic

information and instructions provided:

Conventions

Remote control button identifiers are set in upper-case bold type; for example, “Press EXIT to return to the previous menu.”

Computer input (commands you type) and output (responses that appear on-screen) is shown in monospace (fixed-width) type; for example: “To change the aspect ratio to Letterbox, type [S4E0002.”

All keys with functional names are initial-capped, set in bold type and enclosed in angle brackets. These keys are the following: <Enter>, <Spacebar>, <Control>, <Esc> and <Tab>.

<Enter> indicates that you may press either the RETURN or ENTER key on your computer keyboard if it has both keys.

In addition to these conventions, underlining, boldface and/or italics are occasionally used to highlight important information, as in this example:

A carriage return must be used after each command or string.

Note

Vidikron VL-52 and VL-57 Installation/Operation Manual

1

Page 13
Image 13
Vidikron VL 52 operation manual 1Introduction, About This Manual