Vidikron VL 52 operation manual Main Menu, Source, Aspect Ratio

Operation

The Main Menu is the starting point for accessing all DView functions.

(The ISF Calibration menu is not accessible until you enter a passcode.)

Main Menu

VL-52

Source

Aspect Ratio

Picture Adjust

Audio

Timer

Setup

ISF Calibration

From the Main Menu, select Source to choose a video signal source.

The active source is indicated by an arrow (>) to its left; in this example, Input 1 is the active source.

Source

>Input1

Input2

Input3

Input4

RGB HDMI1 HDMI2

To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio from the Main Menu and press ENTER. Select the appropriate aspect ratio for the type of program material being viewed; refer to Table 4-1.

The currently-selected aspect ratio is indicated by an arrow (>) to its left; in this example, 16:9 is selected.

The aspect ratio selection persists until you change it. (It is not saved

Note independently for each input.)

Aspect Ratio

>16:9

4:3 Letterbox IntelliWide

Vidikron VL-52 and VL-57 Installation/Operation Manual 27