Viking DESO127SS Self-Clean Cycle, To start the Self-Clean cycle, To stop the Self-Clean cycle

Cleaning and Maintenance

Self-Clean Cycle

This oven features an automatic pyrolytic self-cleaning cycle. During this cycle, the oven reacheselevatedtemperatures in order to burn off soil and deposits. An integral smoke eliminator helps reduce odors associated with the soil burn-off. A powder ash residue is leftin thebottomof theovenaftercompletion of the Self- Clean cycle. Thedoor latchis automaticallyactivatedafter selecting the Self-Clean setting. The latch ensures that the door cannot be openedwhile the oven interioris at clean temperatures.

To start the Self-Clean cycle:

1.	Close the door completely.
2.	Turn the oven selectorknob clockwiseto the self-clean mode.
3.	Turn the temperaturecontrol knob past the clean setting until
	the knob stops. At this time, the clean indicatorlight will come
	on. Within 30 seconds the automatic door latch engages and
	the oven indicator light comes on. The oven indicator light will
	remain on until the ovenreachesthe self-cleantemperature and

Cleaning and Maintenance

To stop the Self-Clean cycle:

To cancel or interrupt the self-cleaning cycle, turn both the temperature control knob and the oven function selector knob to OFF. When the oven temperature drops to a safe temperature, the automatic door latch will release and the oven door can be opened. When the oven has completely cooled, remove any ash from the oven surfaces with a damp sponge or cloth.

Replacing Interior Halogen Oven Lights

CAUTION

DISCONNECT THE ELECTRIC POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BEFORE REPLACING BULB.

Do not touch bulb with bare hands. Clean off any signs of oil from the bulb and handle with a soft cloth.

glass light

cover

will then cycle on and off duringthe self-cleancycle. When the

oven reaches the elevatedtemperatureneeded for self-clean,

the door lock indicator light comes on.

4. The door lock indicatorlight will remain on until the self-clean is

completedor interruptedand the oven temperature drops to a

safe temperature.A complete cycle approximately 3 1/2 hours

1.Unsnap glass light cover using a screwdriver in the access groove.

2.Firmly grasp light bulb and pull out.

access groove

Product Care

with an additional30 minutesneededfor the oven to cool down

enoughfor the door latchto disengage.NOTE: A fan noise will

be heard during the self-cleancycle and will continue to run for

the 3 1/2 hour duration of the self-cleancycle.

5. When the cycle is completed, turn both the oven selector and

temperature control knob to the off position. When the oven

has completely cooled, open door and remove any ash from

the oven surfaces with a damp cloth.

3.Replace with halogen bulb using volt and wattage requirements listed on glass cover.

4.Replace the light cover by snapping glass cover onto metal box.

5.Reconnect power at the main fuse or circuit breaker.

Power Failure

light bulb

Product Care

Do not attempt to use during a power failure. Unit will not function.

37 38