Viking DEDO127, DEDO127SS, DEDO130, DEDO130SS, DEDO527, DEDO527SS, DEDO530, DEDO530SS, DESO127, DESO127SS, DESO130, DESO130SS, DESO130T, DESO130TSS, DESO527, DESO527SS, DESO527T, DESO527TSS, DESO530, DESO530SS, DESO530T, DESO530TSS, F20362B, F20362D, VEDO127, VEDO1272BK, VEDO1272SS, VEDO127SS, VESO127, VESO1272, VESO1272SS, VESO127BK, VESO127SS BrassParts, BroilerPan and Grid, OvenRacks, MeatProbe, Beforestartingthe Self-Cleancycle:

Product Care

Cleaning and Maintenance

WARNING

To Prevent Personal Injury

Before removing the doors, make sure the pins are properly

installedin the hinges. Failureto do so can result in personal

injury to hands and/or fingers.

WARNING

Burnor ElectricalShock Hazard

Make sure all controls are OFF and oven is COOL before

cleaning.Failureto do socan result in burnsor electricalshock.

CAUTION

Donot touchthe exteriorportionsof the ovenafter self-cleaning

cyclehas begun,since someparts becomeextremelyhot to the

touch!Duringthe firstfew timesthe self-cleaningfeatureisused,

theremay be some odor and smokingfrom the curingof the

binderin thehigh-densityinsulationused inthe oven. Whenthe

insulationis thoroughlycured, this odorwill disappear.During

subsequent self-cleaning cycles, you may sense an odor

characteristic of high temperatures. Keep the kitchen well-

ventedduringthe self-cleaningcycle.

BrassPartsBroilerPan and Grid

Clean withdetergent and hotwater. For stubborn spots,use a

soap-filledsteel wool pad.

OvenRacks

Clean with detergent and hot water. Stubborn spots can be

scouredwith a soap-filledsteelwool pad. DONOT CLEANTHE

OVEN RACKS USING THE SELF-CLEAN CYCLE. They could

sustaindamage due tothe extreme heatof the Self-Cleancycle.

Theoven racksupports aredesignedto remain in theoven during

theSelf-Cleancycle.

MeatProbe

Themeat probe may becleaned with soapand water or a soap-

filled scouring pad. Cool the probe before cleaning. Scour

stubbornspotswith a soap-filledscouringpad, rinseand dry.

•Do not immersethe meat probein water.

•Do not store theprobe in the oven.

Beforestartingthe Self-Cleancycle:

1. Removethe ovenracks, and any otheritems/utensilsfrom the

oven.The high heat generatedduring thecleaning cycle can

discolor, warp, and damage these items. The oven rack

supportsare designedto remain in the ovenduring the Self-

Cleancycle.Donot use foilor liners inthe oven.During theSelf-

Cleancyclefoil can burnor melt and damagethe ovensurface.

2. Wipeoffany largespills fromthe oven bottomand sides.Never

use oven cleaners inside a self-cleaningoven or on raised

portionsofthe door.

3. Someareas of the ovenmust be cleanedby hand before the

cycle begins. Soils inthese areas will be bakedon and very

difficultto cleanif not removedfirst. Clean thedoor up to the

gasket,thedoor frame,and upto 2 inches insidethe framewith

detergentandhot water.Rinse thoroughlyand dry.

Cleaning and Maintenance

CAUTION

Allspecialorderedbrass partsare coatedwith anepoxy coating.

DONOT USEBRASS CLEANERSORABRASIVECLEANERSON

ANY BRASS PARTS. All brass body parts shouldbe wiped

regularlywith hotsoapy water. Whenhot soapywater will not

do the job, useevery day household cleaners that are not

abrasive.