Vivotek IP8361 user manual Vivotek, uartmode

VIVOTEK

			2-2
uartmode	rs485,	4/4	RS485 or RS232.
	rs232
uartreset	<boolean>	4/4	Set the flag to true to apply change in UART
			configuration.
customdrvcmd_i<	string[128]	1/4	PTZ command for custom camera.
0~9>
speedlink_i<0~4>	string[40]	1/4	Additional PTZ command name.
_name
speedlink_i<0~4>	string[128]	1/4	Additional PTZ command list.
_cmd
updatecustomdrvc	1	7/4	Set this flag to true to apply change in custom command
md			configuration.
updatespeedlinkc	1	7/4	Set this flag to true to apply change in additional PTZ
md			command configuration.
ptzdriver	0~19,	4/4	The PTZ driver is used by this COM port.
	127(custom)
	,128(no
	driver)

Group: snmp (capability.snmp) (product dependent)

NAME		VALUE		SECURITY	DESCRIPTION
				(get/set)
v2	0~1		6/6		SNMP v2 enabled. 0 for disable, 1 for enable
v3	0~1		6/6		SNMP v3 enabled. 0 for disable, 1 for enable
secnamerw		string[31]	6/6		Read/write security name
secnamero		string[31]	6/6		Read only security name
authpwrw		string[8~128]	6/6		Read/write authentication password
authpwro		string[8~128]	6/6		Read only authentication password
authtyperw		MD5,SHA	6/6		Read/write authentication type
authtypero		MD5,SHA	6/6		Read only authentication type
encryptpwrw	string[8~128]		6/6		Read/write password
encryptpwro	string[8~128]		6/6		Read only password
encrypttyperw		DES	6/6		Read/write encryption type
encrypttypero		DES	6/6		Read only encryption type
rwcommunity	string[31]		6/6		Read/write community
rocommunity		string[31]	6/6		Ready only community
syslocation		string[128]	6/6		Description of Camera location (Ex. Address)
syscontact	string[128]		6/6		Description of Camera contactor (Ex. E-mail)

User's Manual - 141