Vivotek IP8361 Drive the Digital Output, Vivotek, Method: GET/POST, do<num>, return, Users Manual

VIVOTEK

PARAMETER	VALUE	SECURITY	DESCRIPTION
		(get/set)
patrolseq	string[120]	1/4	The patrol sequence of ePTZ. All the patrol position
			indexes will be separated by “,”.
patroldwelling	string[160]	1/4	The dwelling time (unit: second) of each patrol point,
			separated by “,”.
preset_i<0~19>_	string[40]	1/7	Name of ePTZ preset.
name			(It should be set by ePreset.cgi rather than by
			setparam.cgi.)
preset_i<0~19>_p	<coordinate>	1/7	Left-top corner coordinate of the preset.
os			(It should be set by ePreset.cgi rather than by
			setparam.cgi.)
preset_i<0~19>_s	<window size>	1/7	Width and height of the preset.
ize			(It should be set by ePreset.cgi rather than by
			setparam.cgi.)

Drive the Digital Output

Note: This request requires Viewer privileges.

Method: GET/POST

Syntax:

http://<servername>/cgi-bin/dido/setdo.cgi?do1=<state>[&do2=<state>] [&do3=<state>][&do4=<state>][&return=<return page>]

Where state is 0 or 1; “0” means inactive or normal state, while “1” means active or triggered state.

PARAMETER	VALUE	DESCRIPTION
do<num>	0, 1	0	– Inactive, normal state
		1	– Active, triggered state
return	<return page>	Redirect to the page <return page> after the parameter is
		assigned. The <return page> can be a full URL path or relative
		path according to the current path. If you omit this parameter, it
		will redirect to an empty page.

Example: Drive the digital output 1 to triggered state and redirect to an empty page. http://myserver/cgi-bin/dido/setdo.cgi?do1=1

154 - User's Manual