VIVOTEK
5.Tighten the lens cover.
6.Open the back cover.
7.Tear down the aluminum foil vacuum bag and take out the silica gel. Attach the silica gel to the inner side of the back cover, then tighten the back cover. (Please replace the silica gel desiccant with a new one if you open the back cover after installation.)
6
5
7
NOTE:
If you want to use the supplied sun shield for outdoor environments, please follow the steps below to install:
1.Tighten the supplied two coupler screws.
2.Attach the supplied sun shield to the Network Camera and slide it to the desired position.
3.Fix the sun shield with the supplied two screws.
1 | 2 |
3
User's Manual - 17
