Vivotek IP8361 user manual Group eventcustomtaskfilei0~2

VIVOTEK

Group: event_customtaskfile_i<0~2>

PARAMETER	VALUE	SECURITY	DESCRIPTION
		(get/set)
name	string[41]	6/6	Custom script identification of this entry.
date	string[17]	6/6	Date of custom script.
time	string[17]	6/6	Time of custom script.
Group: event_i<0~2>
PARAMETER	VALUE	SECURITY	DESCRIPTION
		(get/set)
name	string[40]	6/6	Identification of this entry.
enable	0, 1	6/6	Enable or disable this event.
priority	0, 1, 2	6/6	Indicate the priority of this event:
			“0” = low priority
			“1” = normal priority
			“2” = high priority
delay	1~999	6/6	Delay in seconds before detecting the next event.
trigger	boot,	6/6	Indicate the trigger condition:
	di,		“boot” = System boot
	motion,		“di”= Digital input
	seq,		“motion” = Video motion detection
	visignal,		“seq” = Periodic condition
	recnotify,		“visignal” = Video input signal loss.
	tampering,		“pir” = PIR detection.
	pir		“recnotify” = Recording notification.
			“audioswitch” = Audio switch.
			“tampering” = Tamper detection.
			“iva” = IVA trigger.
triggerstatus	String[40]	6/6	The status for event trigger
di	<integer>	6/6	Indicate the source id of di trigger.
			This field is required when trigger condition is “di”.
			One bit represents one digital input.
			The LSB indicates DI 0.
vi	<integer>	6/6	Indicate the source id of vi trigger.
			This field is required when trigger condition is “vi”.
			One bit represents one digital input.
			The LSB indicates VI 0.

User's Manual - 147