Vivotek IP8361 user manual Vivotek, Users Manual

VIVOTEK

			UART transfer.
transmission_mode	Tx,	0/7	Indicate transmission mode of the machine:
	Rx,		TX = server, Rx = receiver box, Both = DVR.
	Both
network_wire	<boolean>	0/7	Indicate whether to support Ethernet.
network_wireless	<boolean>	0/7	Indicate whether to support wireless.
wireless_s802dot11	<boolean>	0/7	Indicate whether to support wireless
b			802.11b+.
wireless_s802dot11	<boolean>	0/7	Indicate whether to support wireless
g			802.11g.
wireless_beginchan	1 ~ 14	0/7	Indicate the begin channel of wireless
nel			network
wireless_endchanne	1 ~ 14	0/7	Indicate the end channel of wireless
l			network
wireless_encrypt_w	<boolean>	0/7	Indicate whether to support wireless WEP.
ep
wireless_encrypt_w	<boolean>	0/7	Indicate whether to support wireless WPA.
pa
wireless_encrypt_w	<boolean>	0/7	Indicate whether to support wireless WPA2.
pa2
derivative_brand	<boolean>	0/7	Indicate whether to support the upgrade
			function for the derivative brand. For
			example, if the value is true, the VVTK
			product can be upgraded to VVXX.
			(TCVV<->TCXX is excepted)
npreset	<positive integer>	0/7	Number of preset locations.
eptz	<positive integer>	0/7	A 32-bit integer, each bit can be set
			separately as follows:
			Bit 0 => stream 1 supports ePTZ or not.
			Bit 1 => stream 2 supports ePTZ or not.
			The rest may be deduced by analogy
nanystream	<positive integer>	0/7	number of any media stream per channel
iva	<boolean>	0/7	Indicate whether to support Intelligent
			Video analysis
ir	<boolean>	0/7	Indicate whether to support IR led.
tampering	<boolean>	0/7	Indicate whether to support tampering
			detection.
adaptiverecording	<boolean>	0/7	Indicate whether to support adaptive
			recording

146 - User's Manual