Vivotek IP8361 user manual Server port

VIVOTEK

FTP: Select to send the media files to an FTP server when a trigger is activated.

■Server address: Enter the domain name or IP address of the FTP server.

■Server port

By default, the FTP server port is set to 21. It can also be assigned to another port number between 1025 and 65535.

■User name: Enter the login name of the FTP account.

■Password: Enter the password of the FTP account.

■FTP folder name

Enter the folder where the media file will be placed. If the folder name does not exist, the Network Camera will create one on the FTP server.

■ Passive mode

Most firewalls do not accept new connections initiated from external requests. If the FTP server supports passive mode, select this option to enable passive mode FTP and allow data transmission to pass through the firewall.

To verify if the FTP settings are correctly configured, click Test. The result will be shown in a pop-up window as shown below. If successful, you will also receive a test.txt file on the FTP server.

Click Save to enable the settings, then click Close to exit the page.

User's Manual - 95