VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Camera Control
This section explains how to control the Network Camera’s Pan/Tilt/Zoom/Focus operation via the control panel and how to preset positions.
Preset Locations
On this page, you can preset positions for the Network Camerato go to directly or patrol. A total of 128 preset positions can be configured.
Please follow the steps below to preset a position:
1.Adjust the shooting area to a desired position using the buttons on the right side of the window.
2.Click Set as home or Default home to define your home position.
3.Enter a name for the preset position, which allows for up to forty characters. Click Add to enable the settings. The preset positions will be displayed under the Preset Location list on the
4.To add additional preset positions, please repeat step 1~3.
5.To remove a preset position from the list, select it from the
6.Click Save to enable the settings.
3
1Functions are the same as the Control Panel on the home page
2
3
5
6
User's Manual - 65
