VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Installation

Hardware Installation

1.Attach the alignment sticker to the wall.

2.Drill four pilot holes into the wall.

3.Attach the black cover to the Network Camera using the four supplied black screws.

4.Stick the two pieces of supplied silica gel symmetrically to the inner side of the dome cover.

Then place the metal ring into the dome cover to fix the silica gel.

5.Fix the dome cover to the Network Camera and secure it by rotating it clockwise.

6.Loosen the three screws on the front opening of the wall mount bracket.

7.Place the O-ring on the front opening of the wall mount bracket.

8.Feed the cables through the front opening of the wall mount bracket and pull them from wall outlet.

9.Attach the Network Camera to the wall mount bracket by tightening the three screws on the front opening of the wall mount bracket.

10.Fasten the wall mount bracket to the wall.

1

7

8

 

2

 

 

 

3

5

6

10

9

4

User's Manual - 7

Page 7
Image 7
Vivotek SD7313 manual Hardware Installation