Vivotek SD8362E manual Check Enable and apply this profile

VIVOTEK

- Gain control: see above for description.

WDR (Wide Dynamic Range): This function allows users to identify more image details in an environment with dark objects posed against an extremely bright background. You may enable the function by selecting Auto or the Manual mode, and then adjust the sensitivity and correction level (low, medium, high) to acquire the best image quality.

NOTE:

This camera supports Double exposure in the WDR mode. Double exposure is an advanced firmware

algorithm that delivers best image quality by comparing two video frames taken with different shutter speeds, eg, 1/60s and 1/4500s, and rendering data points from them into a well-balanced image Note that if this feature is enabled, the camera's video frame rate will be halved, eg, from 60fps to 30fps With frames taken at two different shutter speeds, the Long exposure is always set at 1/60s,

while the Short exposure value is user-configurable depending on the lighting condition of where the

camera is deployed

When completed with the settings on this page, click Save to enable the setting.

Please follow the steps below to setup a profile:

1.Check Enable and apply this profile.

2.Select the applied mode: Day mode, Night mode, or Schedule mode. Please manually enter a range of time if you choose the Schedule mode.

3.Configure Exposure control settings in the following columns.

4.Click Save to enable the setting and click Close to exit the page.

User's Manual - 73