VIVOTEK
General Connection (without PoE)
1.If you have external devices such as sensors and alarms, connect them to the general I/O terminal block.
|
|
| GND: Ground |
|
|
| DO2: Digital Output 2 |
| GND | ||
| DO+ | DO1: Digital Output 1 | |
| DO2- |
| |
| DO1- |
| |
|
|
| DO+: Digital Outupt (DC12V) |
|
|
| |
|
|
|
|
| GND |
| GND: Ground |
| DI3 |
| |
| DI2 |
| DI3: Digital Input 3 |
| DI1 |
| |
|
|
| |
|
|
| DI2: Digital Input 2 |
|
|
| |
|
|
| DI1: Digital Input 1 |
GND -
DO2 -
DO1
DO+
GND
D13
D12
D11
2.Use the supplied RJ45 female/female coupler to connect the Network Camera to a switch.
Use Category 5 Cross Cable when Network Camera is directly connected to a PC.
POWER | COLLISION |
|
|
|
|
| LINK |
| 1 | 2 |
|
|
| RECEIVE | |
|
| 3 | 4 | 5 | PARTITION |
(AC 24V 3.5A) Power Adapter
3. Connect the power cable from the Network Camera to a power outlet.
Power over Ethernet (PoE 802.3at)
When using a non-PoE switch
Use a PoE Plus power injector to connect between the Network Camera and a
GND- | |
DO2 | - |
DO1 | |
DO+ | |
GND
D13
D12
D11
POWER | COLLISION | 1 |
|
|
|
|
| 2 | 3 | 4 |
| ||
|
|
| 5 |
PoE Plus Power Injector
LINK 
RECEIVE 
PARTITION
User's Manual - 9
