First access to VisualServer
Through direct connection by null modem cable administrators can open the default web browser and type in 200.1.1.1 as the address and press enter. Note that 200.1.1.1 will be the default IP address in a dial-in connection and 200.1.1.100 will be the given IP address for the user's PC by VisualServer. The user name and password are the same as what was entered during installation.
After successful authentication, administrators should see the motion pictures in the main page. When using Microsoft Internet Explorer, administrators should allow a plug-in provided by VisualServer to install additionally. For best security, administrators must change the password on the system page of configuration immediately. After changing the password, the browser will display the authentication window again to ask for new password. Note that the new password will also be used in the next dialup.
To make VisualServer successfully work in dial-in and dial-out modes, follow the procedures below for
34
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097
