Vivotek VS3102 user manual 886-2-22404099 886-2-22404097

basic configurations. If people other than the administrator will be allowed to use VisualServer, the administrator should add these user profiles in the Security option. When VisualServer accepts dial-in connection and acts as a server, the user name and password used in dialing are the same as what was stored in the user database managed for web access. Any managed user can be authorized during PPP negotiation and access web pages. However only administrators can access the configuration page.

There is more information needed for correct modem operation. Refer to the modem setting section in configuration for further settings. VisualServer will wait for someone to dial in. If the administrator has setup some conditions in the application, VisualServer will automatically dial out based on the administrator's configuration. Refer to the application section in configuration for special security applications. After everything is set and saved, turn off VisualServer and replace the null modem cable with modem for dial-up network. Since the null modem connection is used to configure VisualServer in advance for modem connection, administrators cannot connect again without restarting the system.

If dial-out configuration is activated, VisualServer will dial out to send a system startup log to test and drop the call after the pre-configured period.

35

www.vivotek.com

T: 886-2-22404099

F: 886-2-22404097