Vivotek VS3102 user manual Advanced functions, Viewing system log, Viewing system parameters

Advanced functions

Web

Viewing system log

Click the button on the configuration page to view the system log file. The content of the file reveals useful information about configuration and connection after the system boots up.

Viewing system parameters

Click the button on the configuration page to quickly view the whole system parameter set. The content is the same as CONFIG.INI.

Restore factory default settings

Click the button on the configuration page to restore the factory default settings. This means any changes made before will be lost and the system will be reset to the initial status when shipped from the factory. After confirmation, the system will restart and require the installer program to setup the network.

Clear data path for proprietary commands

VisualServer provides a highly customized control support to third-party serial interface devices aside from PTZ cameras. That means in addition to setting up a custom camera with PTZF commands, users may utilize this mode and introduce a customized homepage to transmit arbitrary user-defined commands from the user-side to VisualServer. The third-party device connected to the serial port of VisualServer will receive the same command sent by the originator. The user only needs to attach the command in ASCII format after the special URL. VisualServer will parse the command and transfer into binary code to send out. See the clear data mode serial port driver in the URL commands of VisualServer section for detailed description.

75

www.vivotek.com

T: 886-2-22404099

F: 886-2-22404097