Thermostat User Guide
Heat Pump HVAC System Wiring
24COM | BLUE | |
24RC | ||
| ||
24RH | RED | |
| ||
W1 HEAT | WHITE | |
| ||
W2/O | ORANGE | |
G FAN | GREEN | |
Y1 COMP | YELLOW | |
| ||
Y2 COMP | BROWN | |
|
Heat Pump HVAC System
THERMOSTAT CONNECTION
C 24VAC COMMON
R 24VAC RETURN
W 1 Aux Heat
Change Over Valve
G Fan
Y1 Compressor Stage 1
Y2 Compressor Stage 2
JP1: internal RC/RH Jumper Do not cut for HP systems
Typical HVAC system thermostat wiring color codes.
Be sure to verify your
Installation Notes
Heat Pump HVAC System Setup
System Type: Set the mechanical system type to Heat Pump in the Installer Settings Menu
Single Stage Compressor Systems use Y1 for stage 1 heating/cooling, and W1 for stage 2 Aux Heating.
Two Stage Compressor Systems use Y1 for stage 1, Y2 for stage 2 heating/cooling, and W1 for stage 3 Aux Heating.
Change Over Valve: You must configure the thermostat’s changeover valve setting to work correctly with your HVAC system. Check your system information to be sure.
•Changeover settings are made in the Installer Settings – System Settings - Mechanical Settings menu.
•Changeover with cool is the default setting and typical for most systems.
•If you get cooling when you expect heating, change the C/O type to the opposite setting.
HVAC system transformer: Heat pump systems have one system transformer. Do not cut the RC/RH jumper. Wire the HVAC systems 24VAC common (blue wire) to the 24Com terminal, and the 24VAC return (red wire) to the 24RC terminal.
30
