Answering system
Record your own announcement
1.Press ANNC when the telephone is not in use and the system will announce “Announcement. Press PLAY or press RECORD.”
2.Press RECORD and the system announces, “Record after the tone. Press STOP when you are done.”
3.After the tone, speak towards the microphone at the bottom front of the telephone base from about nine inches away.
4.Press 
/PLAY/STOP when finished.
5.The answering system will automatically playback the newly recorded announcement. Press 
/PLAY/STOP to stop the playback at anytime.
6.Press 
/PLAY/STOP again to replay the recorded announcement. Press RECORD to record again (follow steps 2 through 4) if desired. Press ANNC to exit programming mode.
Delete your announcement
1.Press ANNC while in idle mode and the system will announce “Announcement. Press PLAY or press RECORD.”
2.Press X/DELETE and the system will announce “Announcement deleted.”
•Your announcement can be up to
90 seconds in length.
•Announcements shorter than two seconds will not be recorded.
•When your announcement is deleted, calls will be answered with the preset announcement.
Basic operationAnswering system
www.vtechphones.com | 35 |
