GR SERIES GAS FRYERS - TROUBLESHOOTING
FRYMATE (DUMP STATION)
WITH OPTIONAL HEATER
| SYMPTOM |
| POSSIBLE CAUSES |
|
|
|
|
No heat. |
| 1. | Unplugged. |
|
| 2. | Power switch off or inoperative. |
|
| 3. | Main circuit breaker off or open. |
|
| 4. | Malfunctioning heat assembly. |
KLEENSCREEN FILTERING
SYSTEM
SYMPTOM |
| POSSIBLE CAUSES |
|
|
|
Oil not filtering, pump motor is on. | 1. | Filter screen plugged. |
| 2. | Clog in filter system lines. |
| NOTE: When all filtered oil is returned to the fry tank and filter | |
| power switch is off, open the filter drawer approximately 1". | |
| Allow the remaining shortening in the line to drain into the filter | |
| tank to prevent possible clogging after the shortening cools and | |
| solidifies. Close the filter drawer when complete. | |
| 3. | Shortening below 300/F (too thick). |
| 4. | Filter valve switch malfunction. |
| 5. | Filter valve mechanical malfunction. |
| 6. | Pump is inoperative. |
|
|
|
Shortening not discarding, pump motor | 1. | Filter screen plugged. |
on. | 2. | Clog in filter system lines. |
| NOTE: When all filtered oil is returned to the fry tank and filter | |
| power switch is off, open the filter drawer approximately 1". | |
| Allow the remaining shortening in the line to drain into the filter | |
| tank to prevent possible clogging after the shortening cools and | |
| solidifies. Close the filter drawer when complete. | |
| 3. | Shortening below 300/F (too thick). |
| 4. | Discard valve switch malfunction. |
| 5. | Discard valve mechanical malfunction. |
| 6. | Discard hose connection not fully engaged. |
| 7. | Pump is inoperative. |
|
|
|
Pump motor is not running. | 1. | Filter power switch inoperative. |
| 2. | Filter/discard handle not extended. |
| 3. | Filter/discard valve switch malfunction. |
| 4. | Filter relay malfunction. |
| 5. | Pump motor inoperative. |
|
|
|
Page 23 of 24 |
| F25125 (March 2003) |
|
