Manuals / Vulcan-Hart / Household Appliance / Boiler

Vulcan-Hart HCB1, ML-052211, ML-052208, ML-052200, ML-052213, ML52210, ML-52201 BURNER CERAMICS GHCB40

Models: GHMCB44 GHIR44 GHCB44 HCB1 IR2(B) HCB2(B) ML-052202 GHCB40 IR1 ML-52201 ML-052214 ML52210 ML-052213 ML-052200 ML-052208 ML-052211

1 32

Download 32 pages 43.37 Kb

Page 12

BURNER CERAMICS (GHCB40)

BURNER CERAMICS (GHCB40)

WARNING: SHUT OFF THE GAS BEFORE SERVICING.

NOTE: Lower broiler pan for easier access.

4.Remove the grid handle from the grid arm lifting assembly.

5.Remove two bolts, six washers and two nuts from the grid arm lifting assembly and the grid carriage assembly.

6.Remove the grid arm lifting assembly from the grid carriage assembly and the broiler.

7.Remove the four cotter pins and bolts (two each side) from the lever arm bracket and upper and lower lever arm assemblies.

NOTE: When installing grid arm lifting assembly, install washers between grid arm lifting assembly and grid carriage assembly.

8. Reverse the procedure to install.

1. Allow the burner ceramics to cool.

2.Carefully push up on the side and center ceramics to remove from the broiler.

3.Reverse the procedure to install.

– 12 –

Image 12

Vulcan-Hart HCB1, ML-052211, ML-052208, ML-052200, ML-052213, ML52210, ML-052214, ML-52201, IR1, ML-052202 BURNER CERAMICS GHCB40

Contents

GHCB40 SHOWN MODELS GHCB40 ML-052211 GHCB44 ML-052213GHMCB44 ML-052214 HCB1 ML-052202 HCB2B ML-052208 IR1 ML-052200 IR2B ML-052201 GHIR44 ML-052210TABLE OF CONTENTS Burner Manifold Assembly GHCB40 INSTALLATION AND OPERATION CLEANINGSPECIFICATIONS GENERALPage REMOVAL AND REPLACEMENT OF PARTS COVERS, PANELS AND HANDLESBurner Box Cover GHCB40, GHCB44, GHIR44 Burner Shield Cover HCB2B, IR1, IR2BManifold Cover Assembly GHCB40 & GHIR44 Burner Knob Cover Plate HCB2B, IR1 and IR2BControl Panel Cover GHCB40 Lower Front Panel GHCB40Oven Burner Cover GHCB40 Oven Bottom Assembly GHCB40 Augratin Oven Bottom Assembly GHCB40 Oven Door Handle GHCB40GRID CARRIAGE ASSEMBLY ALL MODELS BROILER GRID TRAY ALL MODELSBURNER CERAMICS GHCB40 BURNER ASSEMBLY GHCB40 & HCB2BGHIR44 SUB-MANIFOLDASSEMBLY HEAT SHIELD GHIR44PILOT ELBOW NOZZLE GHCB40BURNER SUB-MANIFOLDGHIR44 GHIR44PILOT MANIFOLD GHIR44 OVEN BURNER ASSEMBLY GHCB40 PILOT BURNER NOZZLES GHIR44Burner Manifold Assembly GHCB40 GAS VALVES, TUBING THERMOSTATS, REGULATORSAND SOLENOIDS Burner Manifold Assembly GHIR44 Oven Pilot Valve GHCB40Oven Burner Valve GHCB40 Pilot Outage Protection Valve GHCB40 Thermostat GHCB40 Oven Burner Nozzle GHCB40 Burner Valve IR2B and HCB2BBurner Valve GHIR44 Regulator GHIR44Regulator HCB2B Solenoid GHIR44LEVER ARM ASSEMBLY ALL MODELS UpperLower BLOWER AND MOTOR GHIR44Blower Switch GHIR44 IR1 and IR2BSERVICE PROCEDURES AND ADJUSTMENTS REGULATOR ADJUSTMENT ALL MODELSGAS SUPPLY CHECKS Light GHIR44PILOT ADJUSTMENT ALL MODELS BURNER VENTURI AIR SHUTTER ADJUSTMENTGHCB40 AND HCB2B BURNER SERVICE ALL MODELS BURNER ORIFICE SERVICE ALL MODELSTROUBLESHOOTING SYMPTOMSPOSSIBLE CAUSES FORM 35608 Aug