Manifold Cover Assembly (GHCB40 & GHIR44)
WARNING: SHUT OFF THE GAS BEFORE SERVICING.
1.Remove the grease tray from the broiler (GHCB40 only).
NOTE: The GHIR44 manifold cover assembly has a chain to protect switch wiring.
2.Loosen the mounting screw in each burner knob.
3.Remove the two burner knobs from the broiler.
4.Remove the two screws from the manifold cover assembly.
5.Remove the manifold cover assembly from the broiler.
6.Reverse the procedure to install.
Burner Knob Cover Plate [
HCB2(B), IR1 and IR2(B)]
WARNING: SHUT OFF THE GAS BEFORE SERVICING.
1.Loosen the mounting screw in each burner knob.
2.Remove the burner knob.
3.Remove two screws from the burner knob cover plate and the broiler.
4.Slide the burner knob cover plate out and remove it from the broiler.
5.Reverse the procedure to install.
– 7 –