Installing Battery in Remote Control
The Wadia 170iTransport remote control will ship with the required battery preinstalled. However, you will need to remove the clear plastic insert tab from the battery to allow operation of the remote.
◆Connecting to AC Power
Check to make sure that the power cord shipped with your Wadia 170iTransport has been manufactured for operation at your AC line voltage. Damage caused by improper operation is not covered by Wadia warranty. If the included cable and wall termination is different from your AC outlet, contact your Wadia dealer.
◆Installing iPod Dock Inserts
The Wadia 170iTransport comes with several dock inserts that will allow it to accommodate the compatible iPod models. First, you will want to determine which insert fits your iPod model. If there is already a dock insert in the Wadia 170iTransport, you will want to remove it. This is accomplished by applying slight pressure with your thumbs to the back of the insert while pushing up to release the dock insert. To install the new insert, make sure that the two (2) small slits in the inside of the insert are facing the front of the Wadia 170iTransport. Place the dock insert over the
9
