
Safety Instructions
SAFETY, CONTROL, AND INSTRUCTION DECALS
Safety, Control, and Instruction Decals are installed on the machine;
if any are missing, illegible, or damaged, a replacement should be ordered and installed before putting the machine into operation. The Decal Part Number is listed below and in the Parts Manual.
1.
5.
2.
3.
4.
6.
1.Warning – read Operator’s Manual before servic- ing or performing maintenance.
Warning – wear eye and ear protection when op- erating the machine.
2.Forward Speed Control
•Move lever forward to increase speed; back to stop.
3.Warning –
•Do not operate on slopes greater than 15 degrees.
4.Warning – thrown object hazard.
•Keep bystanders away from the machine when operating.
5.Warning – entanglement hazard.
•Keep all guards in place while engine is run- ning.
6.Choke
Location: LH Fender
Part Number:
Location: Hydrostat Oil Reservoir
17