Safety Instructions
SAFETY, CONTROL, AND INSTRUCTION DECALS
Safety, Control, and Instruction Decals are installed on the machine;
if any are missing, illegible, or damaged, a replacement should be ordered and installed before putting the machine into operation. The Decal Part Number is listed below and in the Parts Manual.
1.
2.
Location: Right Side, Behind Operator Seat
Part Number: 8600-23
1.Warning – entanglement hazard.
•Remove ignition key before raising front body.
2.Body Tilt Latch
•Raise lever to release.
•Lift at back of body to raise.
1.
Location: Catcher Door Hinge Bar,
LH and RH Sides
Part Number: 8600-10
1.Caution - Pinch point.
• Keep all body parts clear when closing grass catcher door.
Location: Bridge Assembly and
LH Gear Axle
Part Number:
1. | 2. | 1. |
2.
3.
4.
5.
Location: RH Fender
Part Number:
1.Warning – read Operator’s Manual before servic- ing or performing maintenance.
•Engage parking brake.
•Remove ignition key.
2.Forward Speed Control
•Move lever forward to increase speed; back to stop.
3.Warning – do not operate the machine without a deck or other implement attached.
4.PTO Clutch Lever
•Move lever back to engage PTO clutch; for- ward to disengage.
5.Warning – do not engage PTO clutch with PTO shaft disconnected.
16
