Maintenance Instructions | REPLACING/REPAIRING |
Jackshaft Drive Belt
1.To remove the jackshaft drive belt:
a.Remove the engine PTO drive belt, as described in previous section.
b.Relax the belt by depressing the spring- loaded idler arm.
c.Roll the belt off the jackshaft pulley and remove.
Push Idler Pulley Down to Relax Belt
Idler Pulley
Jackshaft
Jackshaft
Drive Belt
Engine
Pulley
Tension Spring
Jackshaft Drive Belt (Disengaged)
2.Reverse the removal procedure to replace the jackshaft drive belt.
| Idler Arm |
Jackshaft |
|
| Engine |
Jackshaft | Pulley |
Drive Belt |
|
| Tension Spring |
Jackshaft Drive Belt (Engaged)
66
