Maintenance Instructions
lubrication
Ident |
| Lubrication | No. |
No. | Location | Type | Places |
|
|
|
|
1 | Deck Caster Wheel Fork Pivot | Grease | 2 |
2 | Deck Caster Wheel Bearing | Grease | 2 |
3 | Blade Spindle | GreaseΔ | 3 |
4 | Pivot Assembly, | Grease | 4 |
5 | Deck Support Arm Socket | Grease | 2 |
6 | Right Angle Gearbox | Oil*Δ | 1 |
7 | Universal Joint Shaft Assembly | Grease** | 1 |
8 | Dolly Wheel Retract | OilΔ | 1 |
| Lever and Linkage |
|
|
9 | Dolly Wheel Pivot | Grease | 1 |
10 | Idler Arm Pivot | GreaseΔ | 1 |
11 | Tee Gearbox, Deck | Oil* | 1 |
12 | Blade Drive Gearbox | Oil* | 2 |
13 | Steering Lever Pivot | Grease | 4 |
14 | Body Hinge Point | Oil | 2 |
15 | Grease | 1 | |
| (Grease Spline Slide Area) |
|
|
16 | (FSC) Friction Body Pivot | Grease | 1 |
17 | FSC Actuator Rod Pivot Pins | Oil | 2 |
18 | FSC Lever Pivot | Grease | 1 |
19 | FSC Lever Fork | Grease | 1 |
| (Grease Slide Area) |
|
|
20 | Deck Support Arm Pivot | Grease | 2 |
21 | Gear Axle | Oil*** | 2 |
22 | Universal Joint Tube Assembly | Grease** | 1 |
23 | Parking Brake Lever | Grease | 1 |
24 | Universal Joint Quick Connect | Grease | 1 |
| Spline (Grease Slide Area) |
|
|
25 | Belt Tightener Pivot, | Grease | 1 |
| Jackshaft Drive |
|
|
26 | PTO Clutch Lever Pivot | Grease | 1 |
|
|
|
|
Ident |
| Lubrication | No. |
No. | Location | Type | Places |
27 | Clutch Actuator Push Rod | Grease | 2 |
28 | Belt Tightener Pivot, | Grease | 1 |
| PTO Clutch |
|
|
29 | Brake Actuator Rod and Brake | Oil | 3 |
| Band Pivot Pins (Clevis) |
|
|
30 | Choke Control Cable Ends | Oil | 2 |
31 | Brake Actuator Pivot | Grease | 1 |
32 | Catcher Hinge Point | Oil | 2 |
33 | Throttle Control Cable Ends | Oil | 2 |
34 | Engine Oil | Oil*** | 1 |
35 | Belt Tightener Pivot, | Grease | 1 |
| Blower Drive |
|
|
36 | Belt Tightener Pivot, | Grease | 1 |
| Ground Drive | Oil*** |
|
37 | PTO Gearbox Dipstick | 1 | |
38 | Hydrostatic Drive | Oil*** | 2 |
39 | Choke Control Pivot | Oil | 1 |
40 | Throttle Control Pivot | Oil | 1 |
*Gearboxes are permanently lubricated and sealed re- quiring no scheduled lubrication. Oil level should be checked only when an oil leak is noted. Refer to Mower Deck Gearbox Lubrication in this section.
**Grease every eight (8) hours.
***Refer to Gear Axle Lubrication, Engine Oil, Tractor PTO Gearbox Lubrication, and Hydrostatic Trans- mission Fluid in this section.
ΔBelt Driven Decks Only
NOTE: DC42 and DS62
|
| 1 | 10 |
| 3 |
| 1 |
2 |
|
|
|
|
|
| 2 |
|
|
|
|
|
|
| |
3 |
|
|
|
|
|
|
|
4 | 5 | 9 | 8 | 7 | 6 | 5 | 4 |
3
Lubrication Points for Optional Belt Driven Decks (DS62 Shown)
52