INSTALLATION

AERATION

ADJUSTMENT

The burner aeration is factory set but may need adjusting due to either the local gas supply, air supply or altitude. The flames should not extend to the top of the firebox and excessive soot should not be present. The air shutter and the flue restrictor setting will both affect the flame pattern.

Natural Gas: 1/4" (7mm) open

Propane: wide open

1)Remove the Front Cast Iron Panel and Glass Panel, see instructions on page 26.

2)Remove the complete log set. (See Log Installation instructions on page 27).

3)Using a 1/4" nut driver or flat screwdriver, loosen the locking screw on the burner air shutter.

4)Replace the log set, and glass panel.

5)Insert a 3/16" Allen wrench into the adjust- ing key (through) the hole on the rear panel of the stove).

6)Turn the mechanism until to change the flame pattern. Turning clockwise will dimin- ish the flame, and turning counter-clock- wise will increase the flame. The rear flame must not extend and touch the top of the firebox and no soot should be forming on any surfaces.

7)Remove the glass panel, and the log set.

8)Using the 1/4" nut driver or flat screwdriv- er, tighten the locking screw on the burner air shutter.

9)Replace the log set, glass panel and Cast Iron Front Panel.

Caution: Carbon will be produced if the air shutter is closed too much.

Note: Any damage due to carboning resulting from improperly setting the aeration controls is NOT cov- ered under warranty.

Note: Aeration Adjustment should only be performed by an authorized Regency Installer at the time of installation or service.

REMOVING

THE CAST IRON

FRONT PANEL

1)Hold the cast iron front panel at the bottom and lift upwards and out from the stove. Once free of the locating tabs, the panel can be dropped down; freeing it from the top of the stove.

Place the cast iron front panel on a non- abrasive surface, away from any traffic to ensure that it does not get damaged.

2)Remove the Front Glass Panel. Using a 7/16" socket wrench, remove the 6 hex head bolts used to secure the glass panel and frame to the stove. Remove the frame and glass panel and set it aside.

Securing the

Cast Iron Front Panel

1)Catch the panel in the viewing area and on the bottom edge.

2)Place the front panel against the stove just below the top panel.

3)Slide the panel upwards under the top panel. When the top is in position, push the bottom edge into position. Push downwards to secure the locating pins in the locating tabs.

OPTIONAL

FRONT GRILL

1)Remove the Cast Iron Front Panel. Catch the cast iron front panel at the bottom and lift upwards and out from the stove. Once free ofthelocatingtabs,thepanelcanbedropped down; freeing it from the top of the stove.

Place the cast iron front panel on a non- abrasive surface, away from any traffic to ensure that it does not get damaged.

2)Lay the grill into position on the inside of the Cast Iron Front Panel and secure using the 2 screws provided.

26

Waterford TARA T25 Direct Vent Freestanding Gas Stove

Page 25 Page 27
Page 26
Image 26
Waterford Appliances T25-NG, T25-LP Aeration Adjustment, Removing Cast Iron Front Panel, Optional Front Grill
Page 25 Page 27

T25-LP, T25-NG specifications

Waterford Appliances presents the T25-LP and T25-NG, two exceptional models in the realm of gas fireplaces that combine elegance, efficiency, and advanced technology. These fireplaces are designed to create a warm and inviting ambiance in any living space, making them perfect for both modern and traditional homes.

The T25-LP (liquid propane) and T25-NG (natural gas) models feature a sleek design that seamlessly integrates into various interior settings. One of their standout characteristics is the expansive viewing area, which allows for an unobstructed view of the mesmerizing flames. The clean lines and contemporary aesthetics of the T25 series make them a striking focal point in any room.

Functional elegance is enhanced by the innovative Multi-Stage Burner System, which produces a realistic flame pattern and optimal heat output. This technology ensures that both models deliver a beautiful, natural fire while also prioritizing efficiency. With adjustable flame heights, users can customize their experience to suit their mood, whether they desire a soft glow for a cozy evening or a higher flame for more substantial heating.

Energy efficiency is another key feature of the T25 series. Both models have been designed with high-efficiency ratings, allowing homeowners to enjoy warmth without excessive energy consumption. This not only contributes to lower utility bills but also aligns with environmentally conscious living. The incorporation of electronic ignition ensures a hassle-free start-up process, with the option for a remote control that enhances convenience.

Additionally, the T25 fireplaces are equipped with advanced safety features, including a built-in pressure regulator and safety shut-off valves, providing peace of mind for users. The fireplaces also come with a range of customizable options such as decorative media, including glass and logs, allowing homeowners to tailor the look of their fireplace to their personal style.

The T25-LP and T25-NG models stand out not only for their beauty but also for their performance and reliability. With user-friendly controls and durable construction, these fireplaces provide lasting enjoyment and comfort. Waterford Appliances has engineered these units to be low-maintenance while ensuring high-end performance, making them a superior choice for anyone looking to enhance their living environment with warmth and style. Overall, with cutting-edge technology, elegant design, and user-centered functionality, the T25 series is a remarkable addition to any home.
Top Page Image Contents