mAINTeNANce
BURNER TUBES CLEANING OR REPLACEMENT
You will need: Phillips screwdriver, flathead screwdriver, and 5/16"
A)Your Weber® gas barbecue must be OFF and cool .
B)Turn gas OFF at source .
C)Remove cookbox components - warming rack, grates and Flavorizer® bars . (Heat deflectors do not need to be removed .)
Control Panel Removal
To remove control panel:
A)Locate door pin release in door assembly . Using a screwdriver, push down on door pin release (1) until door detaches from frame assembly . Pull top of door away from frame assembly (2) and lift door off bottom adjustable hinge pin .
B)Remove control knobs, igniter button, igniter retention nut, and battery (3) .
C)Remove screws from wind deflector (4) located underneath the control panel with a Phillips screwdriver.
D)Tilt end of wind deflector down and slide away to remove (5) .
E)Remove igniter module from control panel (6) and remove all four wires from module .
F)Remove screws from underside of control panel with Phillips screwdriver (7) .
G)Lift control panel up slightly, tilt up front edge and gently lift up and away (8) .
1
2
3
4
6
5 
8
7
22
