Weider 831.159831 Labeled Pulley BAG, Bracket On the back of the Butterfly Upright, Ed as shown

25. Remove the 3 1/2” Pulleys (35) from the Double				25
	“U”-Bracket (31).
	Wrap the Butterfly Cable (73) around a 3 1/2”			73
	Pulley (35). Attach the Pulley to the Double “U”-				90
	Bracket (31) with a 3/8” x 1 3/4” Bolt (94) and a
	3/8” Nylon Locknut (90).			94
						35
				31
26.	Remove another “V”-Pulley (34) from the bag			26
	labeled “PULLEY BAG 2.”				105
	Wrap the Butterfly Cable (73) around the “V”-			73		34
						37
	Pulley (34) in the direction shown. Attach the
	Pulley and a Long Cable Trap (37) to	the bracket
	on the back of the Butterfly Upright (4)		with a
	3/8” x 2 1/2” Bolt (105) and a 3/8” Nylon Locknut
	(90)Make. sure the Long Cable Trap is orient-					90
	ed as shown.
					4
27. Attach the Butterfly Cable (73) to the bracket on				27
	the Right Butterfly Arm (19) with a 5/16” x 1”
					77
	Shoulder Bolt (84) and a 5/16” Nylon Jamnut (77).
				19
					73
					84
28.	Identify the Rear Cable (70).	It is approximately		28
	95 1/8” long, and it has an eyelet on one end and
				90	97
	a threaded shaft on the other.					8
	Attach the eyelet on the Rear Cable (70) inside					97
						82
	the Center Top Frame (8) with a 3/8” x 2 3/4” Bolt
	(82), two 3/8” Washers (97), and a 3/8” Nylon
	Locknut (90).
						70

14