Weider 831.159831 user manual To hold the Cable in the groove of the Pulley

49.Wrap the Press Cable (72) around a 3 1/2” Pulley

(35)in the direction shown. Attach the Pulley and

a Cable Trap (38) to the indicated hole in the

Press Upright (5) with a 3/8” x 3 3/4” Bolt (101), a 3/8” Washer (97) and a 3/8” Nylon Locknut (90).

Make sure the Cable Trap is positioned to hold the Cable in the groove of the Pulley.

50.Route the Press Cable (72) through the opening in the Press Frame (17) and wrap the Cable around a 3 1/2” Pulley (35) in the direction shown.

Attach the 3 1/2” Pulley (35) and a Cable Trap

(38) to the indicated hole in the Press Frame (17)

with a 3/8” x 3 1/4” Bolt (104), a 3/8” Washer (97) and a 3/8” Nylon Locknut (90). Make sure the

Pulley is attached on the inside of the Press Frame. Make sure the Cable Trap is positioned

to hold the Cable in the groove of the Pulley.

51.Wrap the Press Cable (72) around a “V”-Pulley

(34)in the direction shown. Attach the Pulley and a Long Cable Trap (37) to the small tube on the

Press Upright (5) with a 3/8” x 3 1/4” Bolt (104), a 3/8” Washer (97) and a 3/8” Nylon Locknut (90).

Note: The small tube has four adjustment

holes. Attach the “V”-Pulley in the hole far- thest from the Upright. Make sure the Cable Trap is oriented as shown.

52.Wrap the Press Cable (72) around a 3 1/2” Pulley

(35)in the direction shown. Attach the Pulley to the indicated hole in the Press Frame (17) with a

3/8” x 3 1/4” Bolt (104), a 3/8” Washer (97), and a 3/8” Nylon Locknut (90). Make sure the Pulley is

attached on the inside of the Press Frame. Make sure the Cable Trap is positioned to hold the Cable in the groove of the Pulley.

49

	90
	97
			35
		38	101
		5
50
	72
	90
	35
	38		97
		17	104
51		90
		97
		72

	5
34	37

104

52

104

72

97

38

35

90 17

20