20. Wrap theLong Cable (80) undera 90mmPulley
(28) asshown. Attach the Pulley anda Pulley
Guard(29) tothe Upright(3)with an M10x
113mm ButtonHead Bolt (40) and an M10 Nylon
Locknut(76). Be sure the fiat edge of the
Pulley Guard ison the bottom.
21. Attach a PulleyHousing (94) to the indicated "U'-
channelon the lO-Pound Center Crossbow (44)
withan M10 x 102mm ButtonHead Bolt (24), two
Pivot Bushings(74), and an M10 Nylon Locknut
(76).
Wrap the Long Cable (80) arounda 90mm Pulley
(28). Attach the Pulley insideof the Pulley
Housing(94) withan M10 x 42mm Button Head
Bolt (71) and an M10 Nylon Locknut(76).
22. Wrap the LongCable (80) around a 90mm Pulley
(28).Attach the Pulley and a PulleyGuard (29) to
the indicated M10 x 140mm Carriage Bolt (73)
withan M10 Nylon Locknut(76). Be sure the fiat
edge of the Pulley Guard is on the side
shown.
23. Make sure thereare no Crossbows(not shown)
underthe "U"-channels on the 10-Pound Center
Crossbow(not shown). Have a second person
pullon the Long Cable (80) to create slack inthe
Cable.
Insertthe end of the Long Cable (80) throughthe
weldedtube on the indicatedend ofthe Cross
Tube (11) and then through the remainingSwivel
Arm (22). Be sure the Cable is on the indicated
side of the welded rod in the Swivel Arm.
Insertthe Swivel Arm (22) into the welded tube
on the CrossTube (11). Secure the Swivel Arm
withan M4 x 5mm Screw (104).
Wrap the LongCable (80) around a 90mm Pulley
(28).Attach the Pulley inside of the Swivel Arm
(22) with an M10 x 42mm Button Head Bolt (71)
and an M10 Nylon Locknut (76).
2O
21
22
23
11
71
28
80
Edge
71
80..
28 76
28
Flat
Edge
22
80