i2. Presstwo 25mm Square Inner Caps (54) intothe
indicatedend ofthe BackrestFrame (15).
Attacha PlasticFoot (53) to the BackrestFrame
(15) with an M4 x 16ram Screw (62).
Attachthe two Guard Plates (17) to the inside of
the Backrest Frame (15) with four M4 x16mm
Screws (62).
13. Odent the Backrest(14) and the Backrest
Backing(8) as shown.Attach the Backrestand
the BackrestBacking tothe Backrest Frame(15)
withfour M6 x 45mm Bolts (58).
14. Insertthe rod onthe Backrest Frame (15) intothe
slotin the Seat Carriage (12). Hold the Backrest
Frame vertically over the Seat Carriage and
slide the rod into the slot, as shown in the
inset drawing.
15. Attach the two 10-Pound Short CrossbowCaps
(20) tothe 10-Pound Center Crossbow(44) with
two M4 x 12mm Flat Head Screws (85).
Attach the two 10-Pound CrossbowCaps (101) to
the 10-Pound RemovableCrossbow (67), thetwo
20-Pound CrossbowCaps (88) to the 20-Pound
Removable Crossbow(36), the four 80-Pound
CrossbowCaps (100) to the two 80-Pound
Crossbows(95), and the two 40-Pound Crossbow
Caps (79) to the 40-Pound Crossbow (96) with
tenM4 x 12mm Flat Head Screws (85).
12

SS . 53

L' 62

L=-li :joo
17_/_ L"
17
13
14
14
_% Roa :
15
96
100
9