CLEANING INSTRUCTIONS
ENGLISH
WARNING:
FIRE HAZARD
Shut off the gas supply valve before cleaning.
CAUTION:
BURN HAZARD
Allow hotplate to cool completely before cleaning.
IMPORTANT: DO NOT spill or pour water into controls.
DO NOT submerge griddle cabinet in water. Damage to internal components will occur.
Damage to internal components from water damage is NOT covered by warranty.
DO NOT steel wool or metal scouring pads to clean cabinet or grease tray.
Good sanitation is vital to the quality of the final food product. Be sure to clean in all corners and crevices where grease and other cooking debris can accumulate.
PREPARATION
Turn control valve to a low setting before cleaning. Allow griddle to cool to this lower setting before cleaning.
FREQUENCY
Daily
TOOLS
Bristle Brush
Clean Cloth or Sponge
Mild Detergent
Cleaner Formulated for Stainless Steel
Warm Water
DAILY CLEANING
1.Pour a small amount of water on the griddle surface and let it "sizzle".
2.Clean the griddle surface. Use a pumice stone or griddle brick to scrape food waste. Clean the griddle surface down to bright metal. Wipe off any remaining powder residue.
IMPORTANT: NEVER USE STEEL WOOL TO CLEAN THE GRIDDLE SURFACE!
DO NOT use detergent or oven cleaner to clean the griddle surface.
3.Use a
4.Turn temperature control to OFF. Allow the griddle surface to cool, then wipe the surface with a clean cloth. Dry the griddle surface thoroughly.
IMPORTANT: SEASON THE COOKING SURFACE AFTER EACH CLEANING. See page 9.
5.At least once each day, the grease trough must be thoroughly cleaned. Using a scraper, remove all grease and food waste from the grease trough by pushing it down the waste hole and into the grease tray.
6.After scraping all cooking waste from grease trough into the grease tray, take the grease drawer to the kitchen cleaning area and properly dispose of all waste.
a.Clean drawer with hot water and a mild detergent.
b.Dry drawer thoroughly and reinstall in griddle.
7.Wipe down exterior of griddle cabinet with a clean cloth and non- abrasive cleanser. Rinse thoroughly with water and a clean cloth. Dry with a soft clean cloth.
Procedure is complete.
122 306626 OpManual for
10