Western Digital T13/2132-D manual Tables, Output Parameters

June 23, 2010	T13/2132-D Revision 3
Tables
	Page
Table 1 - Approved ANSI References	3
Table 2 - References Under Development	4
Table 3 - Numbering conventions	9
Table 4 - ATA string byte swapping	11
Table 5 - ATA firmware revision example	11
Table 6 - Conventional Register Definitions	13
Table 7 - Conventional Function Definitions	14
Table 8 - Extended Function Definitions	15
Table 9 - Device Address Packet	16
Table 10 - Removable Media Return Codes	17
Table 11 - Fixed Disk Access	17
Table 12 - Locking and Ejecting	18
Table 13 - EDD Support	18
Table 14 - Floppy Geometries	22
Table 15 - Boot Volume Descriptor	23
Table 16 - Validation Entry	24
Table 17 - Initial/Default Entry	25
Table 18 - Section Header	26
Table 19 - Section Entry	27
Table 20 - Section Entry Extension	28
Table 21 - Interface Support Bit Map	42
Table 22 - Result Buffer	48
Table 23 - Interface Path Definitions	50
Table 24 - Device Path Definitions	52
Table 25 - Device parameter table extension	54
Table 26 - Translation Type	57
Table 27 - CD Specification Packet	60
Table 28 - CD Command Packet	64
Table 29 - Hardware Configuration Sub-Functions	65
Table 30 - Formatted Command Packet	66
Table 31 - Formatted Protocol Specific Data	67
Table 32 - Output Parameters	68
Table 33 - Data Buffer for Security Protocol Commands	69
Table A.1 - Protective MBR with hybrid MBR boot code	71
Table A.2 - Hybrid MBR endeavor IA-32 register values	73
Table A.3 - Hybrid MBR boot code hand over structure	73

Working Draft Enhanced Disk Drive - 4 (EDD-4) ix