Western Digital T13/2132-D

T13/2132-D Revision 3 June 23, 2010

68 Working Draft Enhanced Disk Drive - 4 (EDD-4)

8.27.2.3 Output Parameters

The following output parameters (see table 32), match the parameters defined in 8.27.1. No other return

parameters are necessary for this transport.

Table 32 — Output Parameters

Out Description

AL Undefined

Value Description

00h No Error

01h AX = 50D7h not implemented

80h A condition has occurred which prevented successful command

completion. This may be due to a busy device, a timeout, a bus reset,

short packet, or other event. The host should issue a

Request-Sense-type command in the required protocol.

97h There is no support for the indicated logical drive, although Function

50D7h is recognized.

C3h PSSP is too short.

Remaining Values Reserved

All other registers Preserved

Carry flag 0b if AH is cleared to zero

1b if AH is 1through FFh.