Charcoal filter :
To remove:
1.Remove the vent cover mounting screws.
2.Tip the cover forward, then lift out to remove.
2.Slide the bottom of the vent cover into place. Push the top until it snaps into place. Replace the mounting screws.
After replacing filters:
l Turn the power back on at the main power supply.
3. Lift the back of the charcoal filter. Slide
the filter straight out.
To replace:
l Do not operate the hood without the filters in place.
1 . Slide a new charcoal filter into place. The filter should rest at the angle shown.
40
